Modern Producer
of Structural Steel and Non-Standard Equipment

About the plant

 

�������������� ������_1.JPG

Multifunctional gas-plasma CNC machine “Alfatek 2.0-4 K-1 Pl” for cutting parts of a complex shapes and slitting, with thickness of carbon steel sheet up to 40 mm, of stainless steel up to 20 mm.
Manufacturer: NPO TECHMACH, Ukraine, 2012.

��� ���� ��� ������ �����_1.JPG

Automatic machine for assembly of T- and I-shaped beam with a height up to 1.5 m, model HZJ 15.
Manufacturer: ZHOUXIANG COMPLETE SET OF WELDING EQUIPMENT Co.,LTD, China, 2012.

��� ���� ��� ������ �����.JPG

Mechanized machine for straightening of beams after automatic and semi-automatic welding, JZJ-800 model.
Manufacturer: ZHOUXIANG COMPLETE SET OF WELDING EQUIPMENT Co.LTD, China, 2012.

End milling machine DX 1215 for cutting ends of welded beams, and other structural sections with dimensions up to 1500 mm in vertical and horizontal.
Manufacturer: WUXI VOLCANO WELDING CUTTING & EQUIPMENT co., LTD, China, 2013.

������ ������_1.JPG

Gantry machine for automatic welding of T- and I-beams with a height up to 1.5 m and length up to 12 m, model "Mech Trac 2500".
Manufacturer: ESAB, Sweden, 2012.

��������������� ������_2.JPG

Semi-automatic band saw machines. Models TRANSVERSE 610.440DGH and ERGONOMIC 320.250 DGSH for cutting long steel products (blank cross-sections 610x440 and 320x250mm).
Manufacturer: Bomar, Czech Republic, 2012.

������������� ������.JPG

4-roll bending CNC machine, MN325M model, for rolling of cylindrical and conical products of sheet with a width of 3000 mm, maximum bending thickness 25 mm.
Manufacturer: MG, Italy 2012.

��������������� ������_2.JPG


Hydraulic profile bending machine CE 70H3-RLI for bending of long products (I-beam, channel, angle, square profiles).
Manufacturer: Ercolina, Italy 2012.

��������� ������������_2.JPG

Welding machines with semi-automatic remote manipulator Origo MiG L405.
Manufacturer: ESAB, Sweden, 2012.

��������� ������������_1.JPG

Welding machines with hoisting equipment Tralift.
Manufacturer: TRACTEL, France, 2012.

����� ����������� �������.JPG

Shot blasting line of Rösler RRB 16/5 for high quality preparation of surfaces of welded beams and non-standard steelwork before painting, with a length up to 12 m, cross-section 1, 5 x 1, 0 m.
Manufacturer: Rösler, Germany, 2012.

���������-��������� ������_2.JPG

Paint-drying booth GALIXIA 200G (7280x4000x2800) for painting and drying of steel structures.
Manufacturer: OMIA, France, 2012.

����������-��������� ��������.JPG

Electromagnetic drilling and milling machines, model MAV-485 and MAV-845, drilling diameter up to 100 mm.
Manufacturer: BDS Maschinen, Germany, 2012.

������_AUTOCUT500.JPG

AutoCUT 500 machine for automatic processing of edges of plates with a thickness up to 40 mm of continuous operating length.
Manufacturer: BDS Maschinen, Germany, 2012.

�������-���������....._5.JPG

Turning-milling, drilling and press-forging machinery overhauled in 2012.
Manufacturer country: Russia, Ukraine, Belarus.

������������ ������������_2.JPG

Compressor equipment GA45P and GA55P for production and drying of compressed air with a capacity of 15 m3/min, pressure: 10 bar.
Manufacturer: ATLAS COPCO, Sweden, 2012.

�������� �����.JPG

Overhead cranes and with a capacity of 5.0 and 10.0 t for transportation and tilting of blank parts and finished products.
Manufacturer: Demag Cranes & Components GmbH, Germany, 2012.




Address:
Kiev obl.,
vul. Lekha Kachynskoho 3, Bucha
©2013 UTEM-ZMK
All rights reserved
"